Please submit your quote request for NSN part 588CS18 (Clamp Loop) using the RFQ form below. This part 588CS18 is manufactured by Transdigm Inc (83930) and carries NSN 5340-01-286-8617. To expedite processing, kindly provide the requested quantity and need-by date in the designated form fields.
For reference, this part 588CS18 has an NSN of 5340-01-286-8617, with a NIIN of 01-286-8617 and an NCB Code of 01 (USA). It falls under FSG 53 Hardware and Abrasives and FSC 5340 Hardware Commercial for classification purposes. Providing complete details ensures we prioritize your request effectively.
Note : We Will Not Share Your Information To Any Third Parties.
Aerospace Orbit, an ASAP Semiconductor company, is an AS9120B, ISO 9001:2015, and FAA AC 00-56B certified distributor specializing in Transdigm Inc NSN parts. With access to over 75,000 manufacturers, we source even the most hard-to-find components.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL, AROMATIC AND HYDRAULIC FLUID |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.992 INCHES MINIMUM AND 1.052 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.118 INCHES MINIMUM AND 1.240 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1008 BAND OR STEEL COMP 1009 BAND OR STEEL COMP 1015 BAND OR STEEL COMP 1018 BAND OR STEEL COMP 1020 BAND |
| SFTT | SURFACE TREATMENT | CADMIUM BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
|
Quotes within 15 minutes |
|
|
Competitive Prices |
|
|
Dedicated and Knowledgeable |
|
|
AOG Services 24/7 x 365 |
|
|
Same-day |
Please Remember to Visit Us Again the Next Time You Need Parts.
Request for Quote
