Please submit your quote request for NSN part 110292H (Latch Pintle Hook) using the RFQ form below. This part 110292H is manufactured by Navistar Intl Corp (89346) and carries NSN 2540-00-287-8224. To expedite processing, kindly provide the requested quantity and need-by date in the designated form fields.
For reference, this part 110292H has an NSN of 2540-00-287-8224, with a NIIN of 00-287-8224 and an NCB Code of 00 (USA). It falls under FSG 25 Vehicular Equipment Components and FSC 2540 Vehicle Furniture and Accessories for classification purposes. Providing complete details ensures we prioritize your request effectively.
Note : We Will Not Share Your Information To Any Third Parties.
Aerospace Orbit, an ASAP Semiconductor company, is an AS9120B, ISO 9001:2015, and FAA AC 00-56B certified distributor specializing in Navistar Intl Corp NSN parts. With access to over 75,000 manufacturers, we source even the most hard-to-find components.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.438 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.375 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.500 INCHES NOMINAL |
| ABUJ | THREAD SIZE | 5/16-24 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AKYJ | PIVOT PIN HOLE DIAMETER | 0.880 INCHES MINIMUM AND 0.883 INCHES MAXIMUM |
| BPBT | III PINTLE TYPE FOR WHICH DESIGNED | MANUAL |
| BPBW | THREADED PIVOT PIN LOCKING HOLE | INCLUDED |
| BPCH | WIDTH AT PIVOT PIN HOLE | 1.290 INCHES MINIMUM AND 1.300 INCHES MAXIMUM |
| BPCN | LOCKING PIN HOLE DIAMETER | 0.281 INCHES NOMINAL |
| MATT | MATERIAL | STEEL,A,57-102 FS1045 |
| STYL | STYLE DESIGNATOR | T-LOCK W/COTTERPIN HOLE |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 9403901000 (NAICS 336360) | Parts of furniture of a kind used for motor vehicles |
| SITC : 82180 | Parts of furniture, n.E.S., of metal, wood and other materials |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
|
Quotes within 15 minutes |
|
|
Competitive Prices |
|
|
Dedicated and Knowledgeable |
|
|
AOG Services 24/7 x 365 |
|
|
Same-day |
Please Remember to Visit Us Again the Next Time You Need Parts.
Request for Quote
